The difference between the spreader and the spreader is mainly based on the applicability of the processing material. In terms of fabrics, there are two types, one is thick fabrics, such as woven fabrics, which can usually be done with ordinary stretching machines. The other is knitted fabrics, especially underwear fabrics, which are highly elastic, thin, and soft. Manual processing is very slow, and the effect is very unsatisfactory. Usually cause pulling, retraction, untidy and so on. For the "one millimeter world" of underwear, high-quality underwear must choose a fully automatic spreading machine.

artificial cloth

The fabric stretching machine pulls the fabric out of the fabric roll, and simulates the manual folding operation of the fabric reciprocatingly to meet the requirements for the number of cutting layers. Although the cloth roll can also be actively fed, but because of the weight of the cloth, some tension will be generated, which is suitable for applications with a length of less than 10 meters, and the requirements for the tensile resistance of the processed fabric are very high.

Modern tailoring has spread all over flexible materials and is no longer limited to cloth. Most of them are produced in rolls and transported in rolls. Therefore, when arriving at the user's factory, an important process is to turn the roll-shaped materials into a multi-layer flat state to facilitate cutting and use. In this way, the automatic production equipment automatic spreading machine came into being.

The series of fully automatic spreading machines can carry out tension-free spreading operations. The working method of the spreading machine is that the fabric is in the cradle, and it slides down from the surface of the inclined plate of the spreading machine to the spreading table by the gravity of the fabric itself. Compared with spreading by stretching machine, this way of spreading better guarantees the original state of the elastic fabric, so the effect of spreading without tension is better.